Step 1: The repair process begins with an estimate of the work to be done.
Step 2: Once approval for repairs have been received, a date will be scheduled for repairs to commence.
Step 3: We then disassemble the vehicle and take a closer look at the damaged areas.
Step 4: If necessary, a supplement report is written and sent to you or the insurer for approval. Any additional parts needed will then be ordered.
Step 5: We will provide you with an estimated completion date as we begin the body repair process.

Step 1: Structural and body repairs on the vehicle are begun and the vehicle is set up on Unibody Repair Equipment.
Step 2: We prepare and install new panels that are primed, sealed and protected against corrosion.
Step 3: All work is inspected and tested before being declared ready for painting.
Step 4: Once the vehicle is deemed ready for painting we will call with a confirmed completion date. The vehicle then enters the paint & delivery process.

Step 1: After being pressure washed and cleaned, the vehicle is prepped, primed, sanded and sealed.
Step 2: Before being placed in our down-draft spray booth oven the vehicle will be taped, bagged, masked and blown off.
Step 3: In the spray booth, the vehicle undergoes a multistep refinishing process using an acrylic urethane paint system.
Step 4: The vehicle will be re-assembled, the wheels aligned, air conditioning re-installed, interior detailed and inspected.
Step 5: We will test drive the vehicle to be sure everything is working properly.
Step 6: Once repairs are all completed the owner is notified with confirmation for pickup.